CBG Limited Work Shop Equipment Hoists Spray Booth Tyre Machines Wheel Balancers

QUALITY EQUIPMENT

AFORDABLE PRICES

Daliqibao

B800 Tyre Machine


 
FEATURES

B-800 Tire changer is a speciality of our
 company. At present it is also one of the 
 world's most advanced tire changer.
 The most important features of this machine 
 are as follows:


1. It changes the wheel rim dimension of the
   changed tire by adjusting the changing head and 
   the advance and retreat of vertical shaft and
   adjust it to the optimized position to enable
   easy,Labour-saving and time-saving tire
   changing.It can also avoid the damaging the tire
   opening and ensure the quality of tire changing.

2. The outer clamping of this machine can be up to
   30" and it applies to flat and small tire and
   equipped with a vacuum tire inflation devices.

3. The design of the structural adjustment is 
   reasonable. It is easy to be used and highly
   praised by the broad users.

 Technical parameters

Voltage

380V

Oil PressureStation
Motor

1.5kw 1400r/min

Motor

1.1kw 1400r/min

Working Oil Pressure

8-12MPa

Working Air Pressure

0.7-0.8MPa

Blast and Impact Air
   Pressure

0.6-0.7MPa

Spindle Speed,Double
  Speed

6.8r/min 13.6r/min

Rolling Tire Removal,
Press Wheel tire fitting
   pressure

1400kg

Maximum Diameter of Tire

1250mm

Swinging Arm Rotating
   Radius

600mm

Wheel Width

3"-12"(76mm/305mm)

Wheel Rim Diameter

10"-30"
   (254mm/763mm)

Automatic Centering
   longitudinal movement

285mm

Weight

620kg

Volume(LWH)

170013001750mm

 


 Five-work Position Hydraulic System
Vertical Running System. Can adjust the front and back distance and is suitable to change tire of 10" to 30"
Upper Press Tray Running System;Can cooperate with the lower press tray tire removal,and not damage the tire rim.
Lower Press Tray Running System:Cancooperate with the upper press tray tire removal and can also complete two-layer tire removal
Working head forward and backward running system:Can be suitable to change tire of 10" to 30" tires.
Working Head Up and Down Running System:Can adjust the height of tire removal. The thickness of the tire is 3" to 22".

 
 Four-work Position Pneumatic System
Tire Lifting System:Lift the tire automatically,features time and labour saving.
Working head Rotating System:
Can quickly adjust the direction of working head to improve the tire changing speed.
Cone-shaped press Wheel Running System: Quick when fitting tire.
?Blast and Impact System  Driving System
Safety valve,blast and impact-valve,pressure limit valve can adjust the pressure in the gas storage tank.The pressure in the tank should be adjusted to 06. to 0.7 MPa. Blast impact force is large and controlled by double insurance so that it is safe and reliable. Double-speed motor,can improve the speed of changing tire.
Multi-wedge belt driving can increase friction force.
 Monitoring System  Electrical Control System
Operater can Visually monitor the running position of press wheel.
Adopt the imported electronic elements.
Imported Hydraulic Control System. Can be equipped with plastic workinghead to protect the tire to the largest extent. Alluminium Air Valve Body,Stainless Steel Valve Stem.
Pry bar will not be used for tire removal.the tire wheel rim will not damage during tire removal.
Remove the tire by double pressure shaft roller rotating to avoid tire cracking from tire removal.
3 point bead pressure system handle super stiff tire easily. Can be equipped with quick nut,lock tire quickly.

 

 

 

CBG Limited

PO Box 80030

Greenbay, Auckland,New Zealand

64 9 827 2235

sales@cbglimited.co.nz